Generated by All in One SEO v5.0.1.1, this is an llms.txt file, used by LLMs to index the site.

# ISC Tuning - Syvecs & Motec Tuning Specialists

Providing ECU calibration, fuel systems, turbochargers, and wiring harnesses to racing enthusiasts.

## Sitemaps

- [XML Sitemap](https://www.isctuning.com/sitemap.xml): Contains all public & indexable URLs for this website.

## Posts

- [PIERBURG 3 PORT SOLENOID](https://www.isctuning.com/pierburg-solenoid/)
- [NTK L2H2 LAMBDA SENSOR](https://www.isctuning.com/lambda-sensor/)
- [KNOCK SENSOR](https://www.isctuning.com/knock-sensor/)
- [K-TYPE THERMOCOUPLER – EGT](https://www.isctuning.com/thermocoupler-egt-sensor/)
- [FLUID TEMPERATURE SENSOR](https://www.isctuning.com/fluid-temperature-sensor/)
- [FLEX FUEL SENSOR](https://www.isctuning.com/flex-fuel-sensor/)
- [10 BAR FLUID PRESSURE SENSOR](https://www.isctuning.com/10bar-fluid-pressure-sensor/)
- [10 BAR FLUID PRESSURE SENSOR 2022 VERSION](https://www.isctuning.com/10bar-fluid-pressure-sensor-2022-version/)
- [FAST AIR TEMPERATURE SENSOR](https://www.isctuning.com/fast-air-temp-sensor/)
- [5 BAR MAP SENSOR](https://www.isctuning.com/5bar-map-sensor/)
- [4 BAR MAP SENSOR](https://www.isctuning.com/4bar-map-sensor/)
- [WIRELESS CONNECTION MODULE](https://www.isctuning.com/wireless-connection-module/)
- [KT8 V2 – K-TYPE 8 CHANNEL EGT EXPANDER](https://www.isctuning.com/kt8-v2-egt-expander/)
- [PLEX KNOCK MONITOR V2 SINGLE CHANNEL](https://www.isctuning.com/plex-knock-monitor/)
- [CALIBRATION SWITCH](https://www.isctuning.com/calibration-switch/)
- [50HZ GPS RECEIVER](https://www.isctuning.com/50hz-gps-receiver/)
- [BLUETOOTH MODULE & APP – V2](https://www.isctuning.com/bluetooth-module-app-v2/)
- [S6 Plus](https://www.isctuning.com/s6-plus/)
- [S8](https://www.isctuning.com/s8/)
- [S12](https://www.isctuning.com/s12/)
- [S7 Plus](https://www.isctuning.com/s7-plus/)
- [Subaru 2008-2016](https://www.isctuning.com/subaru-2008-2016/)
- [Porsche 996 & 997 Turbo](https://www.isctuning.com/porsche-996-997-turbo/)
- [Porsche 991 Turbo](https://www.isctuning.com/porsche-991-turbo/)
- [Nissan R35GTR](https://www.isctuning.com/nissan-r35gtr/)
- [Nissan 350z - S350z](https://www.isctuning.com/nissan-350z-s350z/)
- [Lotus Exige](https://www.isctuning.com/lotus-exige/)
- [Lamborghini LP560/570](https://www.isctuning.com/lamborghini-lp560-570/)
- [Lamborghini Gallardo LP520](https://www.isctuning.com/lamborghini-gallardo-lp520/)
- [Ford Focus RS Mk3](https://www.isctuning.com/ford-focus-rs-mk3/)
- [Ford Focus RS Mk2](https://www.isctuning.com/ford-focus-rs-mk2/)
- [BMW M3 Kits - E46 & E92](https://www.isctuning.com/bmw-m3/)
- [Audi TTRS](https://www.isctuning.com/audi-ttrs/)
- [Audi R8](https://www.isctuning.com/audi-r8/)
- [Lamborghini Huracan](https://www.isctuning.com/lamborghini-huracan/)

## Pages

- [Home](https://www.isctuning.com/) - Providing ECU calibration, fuel systems, turbochargers, and wiring harnesses to racing enthusiasts.
- [Privacy Policy](https://www.isctuning.com/privacy-policy/)
- [Contact Us](https://www.isctuning.com/contact-us/)
- [Consultation Services](https://www.isctuning.com/consultation-services/)
- [Tech Support](https://www.isctuning.com/tech-support/)
- [Accessories](https://www.isctuning.com/accessories/)
- [Installation Manuals](https://www.isctuning.com/installation-manuals/)
- [Pinout Guides](https://www.isctuning.com/pinout-guides/)
- [Software & Firmware](https://www.isctuning.com/software-firmware/)
- [Engine Management](https://www.isctuning.com/engine-management/)
- [Sensors](https://www.isctuning.com/sensors/)
- [Injector Dynamics](https://www.isctuning.com/injector-dynamics/)
- [Fully Supported Platforms](https://www.isctuning.com/fully-supported-platforms/)
- [Video Academy](https://www.isctuning.com/video-academy/)
- [Frequently Asked Questions](https://www.isctuning.com/faqs/)
- [Sensors & Switches](https://www.isctuning.com/sensors-and-switches/)
- [Accessibility](https://www.isctuning.com/accessibility/)
- [Our Partners](https://www.isctuning.com/our-partners/)
- [ProHub 3000 Dyno Features](https://www.isctuning.com/mainline-dyno-features-and-specifications/)
- [Horsepower Lounge Dyno Booking Calendar](https://www.isctuning.com/hp-lounge-dyno-booking-calendar/)
- [Dyno Tuning](https://www.isctuning.com/dyno-tuning/)
- [About ISC](https://www.isctuning.com/about/) - Providing ECU calibration, fuel systems, turbochargers, and wiring harnesses to racing enthusiasts.
- [Site Map](https://www.isctuning.com/site-map/) - Providing ECU calibration, fuel systems, turbochargers, and wiring harnesses to racing enthusiasts.

## FAQs

- [Is there anywhere that explains better the operation of wideband control?](https://www.isctuning.com/faq-items/is-there-anywhere-that-explains-better-the-operation-of-wideband-control/)
- [Can I adjust map + and – numbers for fuel and ignition? For example, as for fuel 0.1ms to 0.05ms, as for ignition 0.25 to 0.5 deg?](https://www.isctuning.com/faq-items/can-i-adjust-map-and-numbers-for-fuel-and-ignition-for-example-as-for-fuel-0-1ms-to-0-05ms-as-for-ignition-0-25-to-0-5-deg/)
- [Are the map + and – numbers for fuel and ignition functions available on this ecu as well?](https://www.isctuning.com/faq-items/are-these-function-available-on-this-ecu-as-well/)
- [I am running the Rotary control on a Syvecs S6 and the primary and secondary ignition is not responding as it should. I can change the base table 2 to any value and the secondary timing does not follow what I program it to.  I tried ignition timing relative on and off and there just doesn’t seem to be any real control of the secondary timing.  I can set the table to zero and get zero split.  But any value up or down doesn’t necessarily produce what is programmed and all values are greater than the advance on the primary ignition.  So if primary is 10* BTDC, secondary is 10+* BTDC](https://www.isctuning.com/faq-items/i-am-running-the-rotary-control-on-a-syvecs-s6-and-the-primary-and-secondary-ignition-is-not-responding-as-it-should-i-can-change-the-base-table-2-to-any-value-and-the-secondary-timing-does-not-follo/)
- [Can I see fuel and timing map at the same time or any short cut key to change map quickly?](https://www.isctuning.com/faq-items/can-i-see-fuel-and-timing-map-at-the-same-time-or-any-short-cut-key-to-change-map-quickly/)
- [How does the Absolute Pressure Compensation work in Wastegate Control under Output Linearization](https://www.isctuning.com/faq-items/how-does-the-absolute-pressure-compensation-work-in-wastegate-control-under-output-linearization/)
- [Closed throttle position detection. How does it work?](https://www.isctuning.com/faq-items/closed-throttle-position-detection-how-does-it-work/)
- [How are the Ignition Cut and Fuel Cut severities implemented, does it just take this percentage of fuel away on every cylinder?](https://www.isctuning.com/faq-items/how-are-the-ignition-cut-and-fuel-cut-severities-implemented-does-it-just-take-this-percentage-of-fuel-away-on-every-cylinder/)
- [Is it possible to have Throttle based nitrous control?](https://www.isctuning.com/faq-items/is-it-possible-to-have-throttle-based-nitrous-control/)
- [Please explain the VVT Angle Latch Points and VVT Angle Latch Offsets](https://www.isctuning.com/faq-items/please-explain-the-vvt-angle-latch-points-and-vvt-angle-latch-offsets/)
- [I cannot recall where I saw but I think the Lambda sensors supplied are NTK L2H2. Are there any linearization/characterisitic differences with L1H1 sensor? I am just curious about future sensor replacement especially because of all the leaded fuel being used.](https://www.isctuning.com/faq-items/i-cannot-recall-where-i-saw-but-i-think-the-lambda-sensors-supplied-are-ntk-l2h2-are-there-any-linearization-characterisitic-differences-with-l1h1-sensor-i-am-just-curious-about-future-sensor-replac/)
- [I see that for the crank position sensor, sensor type is set to thermistor. Does this mean that Syvecs can utilize magnetic type sensors on all of the configurable AV inputs not just as a crank position? IE drive shaft speed, etc.](https://www.isctuning.com/faq-items/i-see-that-for-the-crank-position-sensor-sensor-type-is-set-to-thermistor-does-this-mean-that-syvecs-can-utilize-magnetic-type-sensors-on-all-of-the-configurable-av-inputs-not-just-as-a-crank-positi/)
- [I have also an AEM 4 channel Wideband with turbo backpressure compensation of which I will be using and would like to have the output feed in the ECU so I have a reading on all cylinders and monitoring.](https://www.isctuning.com/faq-items/i-have-also-an-aem-4-channel-wideband-with-turbo-backpressure-compensation-of-which-i-will-be-using-and-would-like-to-have-the-output-feed-in-the-ecu-so-i-have-a-reading-on-all-cylinders-and-monitorin/)
- [Can I program an Engine Trip for the following, Engine coolant pressure, Fuel pressure, Lambda and EGT on all 4 cylinders and crankcase pressure?](https://www.isctuning.com/faq-items/can-i-program-an-engine-trip-for-the-following-engine-coolant-pressure-fuel-pressure-lambda-and-egt-on-all-4-cylinders-and-crankcase-pressure/)
- [I have a Race Technology Dash 4PRO and DL1 mk3 GPS Data logger of which I need to combine them to work together with the Syvecs.](https://www.isctuning.com/faq-items/i-have-a-race-technology-dash-4pro-and-dl1-mk3-gps-data-logger-of-which-i-need-to-combine-them-to-work-together-with-the-syvecs/)
- [The traction control section is very limited it only shows “Overall enable” as I need to read all the four wheels and employ a suitable strategy that will work from example 2nd gear or above and adjust target slips by gear or vehicle speed.](https://www.isctuning.com/faq-items/the-traction-control-section-is-very-limited-it-only-shows-overall-enable-as-i-need-to-read-all-the-four-wheels-and-employ-a-suitable-strategy-that-will-work-from-example-2nd-gear-or/)
- [Regarding the standard Crank/Cam triggers, can we use stock sensors and triggers?](https://www.isctuning.com/faq-items/regarding-the-standard-crank-cam-triggers-can-we-use-stock-sensors-and-triggers/)
- [Would this be implemented via a “gear cut” and if so what would be the preferred way? I see a time based table….obviously there is no guarantee of shift time with a manual shift.](https://www.isctuning.com/faq-items/would-this-be-implemented-via-a-gear-cut-and-if-so-what-would-be-the-preferred-way-i-see-a-time-based-table-obviously-there-is-no-guarantee-of-shift-time-with-a-manual-shif/)
- [For flat shift operation on a dog box via clutch switch (non sequential) I assume this would be wired and configured on I/O as a clutch switch ?](https://www.isctuning.com/faq-items/for-flat-shift-operation-on-a-dog-box-via-clutch-switch-non-sequential-i-assume-this-would-be-wired-and-configured-on-i-o-as-a-clutch-switch/)
- [Does the lambda simply operate in the background only? With any active trims only available via logging?](https://www.isctuning.com/faq-items/does-the-lambda-simply-operate-in-the-background-only-with-any-active-trims-only-available-via-logging/)
- [Can I change ignition timing by Gear or vehicle speed?](https://www.isctuning.com/faq-items/can-i-change-ignition-timing-by-gear-or-vehicle-speed/)
- [Does the software have a 3 step rev limiter vs vehicle speed per gear?](https://www.isctuning.com/faq-items/does-the-software-have-a-3-step-rev-limiter-vs-vehicle-speed-per-gear/)
- [Do you support the Bosch LSU Senors?](https://www.isctuning.com/faq-items/do-you-support-the-bosch-lsu-senors/)
- [In the datalogging what’s the (exact) meaning of alsState: “TPS_SHUTDOWN” and alsState: “TPS_TIMEOUT”](https://www.isctuning.com/faq-items/in-the-datalogging-whats-the-exact-meaning-of-alsstate-tps_shutdown-and-alsstate-tps_timeout/)
- ["Off Calibration”, “Shutdown Delay” if I understand correctly, this is the actual time the ALS is active after throttle is closed and ALS is enabled.](https://www.isctuning.com/faq-items/off-calibration-shutdown-delay-if-i-understand-correctly-this-is-the-actual-time-the-als-is-active-after-throttle-is-closed-and-als-is-enabled/)
- [How does the Plenum Damping function work?](https://www.isctuning.com/faq-items/how-does-the-plenum-damping-function-work/)
- [What does throttle timeout do exactly?](https://www.isctuning.com/faq-items/what-does-throttle-timeout-do-exactly/)
- [How does the High Temperature Recovery work? It's clear to me what the Recovery Entry and Exit Temperature settings mean. What does the Guard Time mean? What is happening when the Recovery Entry Temperature is exceeded? Does it activate the Recovery Fuel Cut or does it switch off ALS completely?](https://www.isctuning.com/faq-items/how-does-the-high-temperature-recovery-work-its-clear-to-me-what-the-recovery-entry-and-exit-temperature-settings-mean-what-does-the-guard-time-mean-what-is-happening-when-the-recovery-entry-temp/)
- [From the function “Start Calibration” what does mean “Bypass Vehicle Speed”, “Exit Throttle Angle”?](https://www.isctuning.com/faq-items/from-the-function-start-calibration-what-does-mean-bypass-vehicle-speed-exit-throttle-angle/)
- [What is the difference between Start Calibration and Calibration 1 (or 2,3,4)?](https://www.isctuning.com/faq-items/what-is-the-difference-between-start-calibration-and-calibration-1-or-234/)
- [Do you have some manual available for explanation for the ALS settings?](https://www.isctuning.com/faq-items/do-you-have-some-manual-available-for-explanation-for-the-als-settings/)
- [During launch control can I have a set boost target along with RPM?](https://www.isctuning.com/faq-items/during-launch-control-can-i-have-a-set-boost-target-along-with-rpm/)
- [What is Spin Target and Wheelspin parameters? Is it a percentage difference between driven wheels and non-driven wheels?](https://www.isctuning.com/faq-items/what-is-spin-target-and-wheelspin-parameters-is-it-a-percentage-difference-between-driven-wheels-and-non-driven-wheels/)
- [During burnout I need a lower rev-limit and lower boost target.](https://www.isctuning.com/faq-items/during-burnout-i-need-a-lower-rev-limit-and-lower-boost-target/)
- [For wastegate control I need boost by gear and rear vehicle speed, I can't find it in the software.](https://www.isctuning.com/faq-items/for-wastegate-control-i-need-boost-by-gear-and-rear-vehicle-speed-i-cant-find-it-in-the-software/)

## Categories

- [Engine Management](https://www.isctuning.com/category/engine-management/)
- [Supported Platforms](https://www.isctuning.com/category/supported-platforms/)
- [Accessories](https://www.isctuning.com/category/accessories/)
- [Sensors](https://www.isctuning.com/category/sensors/)